Report Feature
Although the global composites industry has experienced moderate growth over the last five years, it is anticipated to gain momentum, reaching approximately $34.1 billion in 2018 with a CAGR of 5.1% over the next five years.
Lucintel, a leading global management consulting and market research firm, has analyzed th
e global composites industry and presents its findings in “Growth Opportunities in Global Composites Industry 2013-2018.”In 2012, the North America composites market grew strongly after modest growth in 2011. With sectors such as aerospace, wind energy, construction, and transportation performing well, the composites market significantly increased in North America. The growth rate in the Asian economies slowed but continued at a modest rate of 5% through 2009. The growing economies in China and India are helping Asia maintain its growth trajectory in the composites arena. The global composites market is expected to experience substantial growth in the near future with new developments in various sectors. Improving economic conditions in major countries such as the US are expected to propel the global composites market once again toward strong growth.
In the future, Lucintel expects higher market fragmentation due to the emerging economies coming into play for the industry. The future market is expected to be highly competitive, and companies with innovative capabilities can be anticipated to thrive and gain market share. Lucintel’s research further reveals that composite materials demand in the aerospace sector is expected to yield the strongest growth rate. APAC and North America are projected to drive the future growth of composite materials.
The global composites industry report by Lucintel provides a concise overview of the global composites market. The study contains detailed analysis of different raw material use such as glass fiber, carbon fiber, aramid fiber, and polyester resin.
The data and analysis found in this report can be utilized for a variety of functional business reasons including business development, strategic planning, business presentations, determination of market size and trend, competitive analysis, investment decisions, business vision, and joint product development.
This report is a must-have report by every company working in the composites industry. In today’s global economy, you need every advantage that you can find to keep you ahead in your business. Learn about current and future trends, identify key players, and explore the directions that the industry and different segments are heading.
To make any investment, business or strategic decisions, you need timely and robust market information. This market report fulfills this core need. This is an indispensable reference guide for composite material suppliers, product manufacturers, investors, researchers, engineers, distributors and many more, who are dealing with the composites industry. Some of the features of this market report are:
• Market size and growth rates of the global composites industry market. Market for FRP and advanced composites
• Global composite industry size in terms of value and volume
• Global composites industry trend (2007-2012) and forecast (2013-2018) in terms of value and volume by region and by application
• Market size estimates for reinforcements and resins
• Market breakdown by application and key region North America, Europe, Asia Pacific, and Rest of the World
• Composites market by country Such as China, India, US, Germany etc.
• sCompetitive analysis between steel, aluminum, plastics and the composites industry
• Market breakdown by manufacturing technologies by Manufacturing process, by market segments by various material types
• Thermoset and Thermoplastic composites market size, trends and forecast
• Market outlook and global trends in automotive, marine, construction, aerospace and other important market segments with needs and challenges of various market segments
• Value chain analysis. Dollar and gross profit flow through of various nodes of the value chain (from raw material to final application)
• Material price and property comparison. Fiber and resin price history and forecast. Material prices of more than 100 materials such as fibers, resins, fabrics, prepregs, adhesives, and metals
• More than 240 figures/charts and 39 tables are provided in this roughly 345-page report
Table of Contents
2.2: Characteristics of the composites industry
3.1: Competitive analysis
3.2: Plastics industry overview
3.3: Steel industry overview
3.4: Aluminum industry overview
3.5: Composites industry overview
4.1: Functions of fibers and resin materials in composites
4.2: Global composites market by fiber type
5.4: Resin market
6.1: Advanced composites market
6.2: Raw materials market
6.3: Thermoset and thermoplastic composites market
6.5: Composites market by molding compounds
7.1: Global composites market by segments
7.2: Driving forces for the use of composite materials
7.3: Key requirements in various market segments
7.4: Transportation Industry Market Outlook and Trend
7.5: Aerospace and defense industry market outlook and trend
7.7: Pipe and tank industry analysis
7.8: Marine market outlook and industry trend
7.9: Consumer goods market outlook and industry trend
7.10: Electrical and electronic industry outlook
7.11: Wind energy
8.1: Global composites market by manufacturing processes
9.3: Trends in North American composites industry
9.4: Trends in European composites industry
9.5: Trends in Asian composites industry
9.7: Forecast for North American composites industry
9.8: Forecast for European composites industry
9.9: Forecast for Asian composites industry
9.10: Forecast for composites manufacturing processes
10.1: Composites shipment by region
11.1: Value chain analysis
12.1: Need for low cost raw materials
12.2: Resins and fiber materials with higher strain to failure
12.3: Better UV and chemical resistant materials
12.4: Low-cost manufacturing process for large and small parts
12.5: Need for high-temperature composite material
12.6: Low shrinkage materials
12.7: Low wear and tear composite materials
12.8: Damping and noise resistance materials
12.9: Optimal resin and additive systems for closed molding operations
12.10: Products manufacturability and affordability
12.11: Flexible gelcoats
12.12: Flame resistant materials
12.13: Self-healing material
12.14: Manufacturing process with lower processing time
12.15: Flexible honeycomb core
12.16: Fabric wrinkling
12.17: Method of cutting wet prepregs
12.18: Need for moisture resistant honeycomb core
12.19: Fast cure epoxy resin
List of Figures
Figure 3.1: Global shipments - competing material 2003-2012
Figure 3.2: Percentage distribution of competing materials in the global industry in 2012
Figure 3.3: US domestic shipments by material type from 2007 to 2012
Figure 3.4: Percentage distribution of competing materials in the US industry in 2012
Figure 3.5: Amount of steel, aluminum, plastic, and composites shipment on a weight basis for the US industry in 2012
Figure 3.6: Composites market potential in various market segments in 2012
Figure 3.7: Global plastic shipment 2007-2012
Figure 3.8: US plastics industry total sales and captive use by type of resins
Figure 3.9: Plastics industry shipment distribution by type of resins
Figure 3.10: US thermoplastic shipment by market in 2012
Figure 3.11: Global steel shipment 2007-2012
Figure 3.12: Steel industry breakdown by major segments in 2012
Figure 3.13: Global primary aluminum shipments
Figure 3.14: Global aluminum shipment by market
Figure 4.1: Global composites market distribution by fiber type in 2012
Figure 4.2: Global composites shipment by fiber type in 2012
Figure 4.3: Fiber market distribution in 2012 in global composites industry on weight basis
Figure 4.4: Fiber market shipment in 2012 in global composites industry on weight basis
Figure 4.5: Fiber market distribution for global composites industry in terms of $M shipment in 2012
Figure 4.6: Fiber shipment in terms of $M in global composites industry in 2012
Figure 4.7: Composites applications by reinforcement form
Figure 4.8: Global fiberglass distribution by type of product form in 2012
Figure 4.9: Fiberglass distribution by type of product form in 2012
Figure 4.10: Percentage distribution of carbon fiber by precursor in M pounds
Figure 4.11: Percentage distribution of carbon fiber by precursor in M dollars
Figure 4.12: Percentage distribution of carbon fiber by tow size in terms of M pounds
Figure 4.13: Growth trend in the carbon fiber market in terms of pounds shipments (2007-2012)
Figure 4.14: Growth trend in the carbon fiber market in terms of $M shipments (2007-2012)
Figure 5.1: Schematic representation of uncured polyester resin
Figure 5.2: Schematic representation of cured polyester resin
Figure 5.3: Schematic representation of uncured vinyl ester resin
Figure 5.4: Schematic representation of cured vinyl ester resin
Figure 5.5: Global composites market distribution (M pounds) by thermoset and thermoplastic resin composites in 2012
Figure 5.6: Global composites market shipment (M pounds) by thermoset and thermoplastic resins in 2012
Figure 5.7: Global composites market distribution ($M) by thermoset and thermoplastic resin composites in 2012
Figure 5.8: Global composites market shipment ($M) by thermoset and thermoplastic resins in 2012
Figure 5.9: Global composites market breakdown by resin type in 2012
Figure 5.10: Global thermoset composites market breakdown by resin type in 2012
Figure 5.11: Global resin consumption (M pounds) by resin type in 2012
Figure 5.12: Global resin shipment ($M) by resin type in 2012
Figure 6.1: Advanced composites market share in global composites industry in 2012
Figure 6.2: Advanced composites market size (M pounds) in global composites industry in 2012
Figure 6.3: Advanced composites market distribution ($ shipment) in global composites industry in 2012
Figure 6.4: Advanced composites market size ($M) in global composites industry in 2012
Figure 6.5: Raw material shipment (M pounds) in global composites industry in 2012
Figure 6.6: Global composites market breakdown (%) by raw materials used in 2012
Figure 6.7: Raw material shipment ($M) in global composites industry in 2012
Figure 6.8: Global composites market breakdown (%, $M) by raw materials used in 2012
Figure 6.9: Global composites market distribution by thermoset and thermoplastic resin composites in 2012
Figure 6.10: Global composites market shipment (M pounds) by thermoset and thermoplastic resins in 2012
Figure 6.11: Global composites market shipment ($M) by thermoset and thermoplastic resins in 2012
Figure 6.12: Global thermoplastic composites market distribution by product form in 2012
Figure 6.13: Global thermoplastic composites market shipment (M pounds) by material type in 2012
Figure 6.14: Global thermoplastic composites market distribution by $ shipment.
Figure 6.15: Global thermoplastic composites market shipment ($M) by material type in 2012
Figure 6.16: Global composites market distribution by material form in 2012
Figure 6.17: Global composites market shipment (M pounds) by material form in 2012
Figure 6.18: Global composites market shipment ($M) by material form in 2012
Figure 7.1: Major OEMs/molders in various market segments
Figure 7.2: Global composites distribution (%, million pounds) in 2012 by end-use application
Figure 7.3: Global composite shipments by application in 2012
Figure 7.4: Global composites distribution (%, $ M) shipment in 2012 by end-use application
Figure 7.5: Global composite shipments ($M) by applications in 2012
Figure 7.6: Composite materials shipment by region
Figure 7.7: Composites shipment (M pounds) by region in 2012
Figure 7.8: Cost vs. performance criteria in various industries for composites usage
Figure 7.9: Composites distribution in the global transportation industry in 2012
Figure 7.10: Composites shipment (M pounds) in the global transportation industry in 2012
Figure 7.11: Composites distribution by region in the transportation industry in 2012
Figure 7.12: Composites shipment by region in the transportation industry in 2012
Figure 7.13: Trends (1991-2012) in total US light vehicle sales (in M of units)
Figure 7.14: Trends (1991-2010) in segmented US light vehicle sales (in thousands of units)
Figure 7.15: Trend in composites shipment in global automobiles (2007-2012)
Figure 7.16: BMW body structure
Figure 7.17: BMW 2012 I3
Figure 7.18: Chevrolet’s 2008 corvette ZR1
Figure 7.19: Composite cargo box of honda’s pickup truck
Figure 7.20: Manufacturing process breakdown for the global transportation industry in 2012
Figure 7.21: Composites shipment (M pounds) by manufacturing process for the transportation industry in 2012
Figure 7.22: Classification of aerospace market according to aircraft type
Figure 7.23: Composites distribution in the global aerospace industry in 2012
Figure 7.24: Composites shipment (M pounds) in the global aerospace industry in 2012
Figure 7.25: Composites distribution by region in the aerospace industry in 2012
Figure 7.26: Composites consumptions by region in aerospace industry in 2012
Figure 7.27: Evolution of composites applications in commercial aircraft
Figure 7.28: Different composite material systems in the Boeing 777
Figure 7.29: Material distributions in the Airbus A340 for buy and fly cases
Figure 7.30: Trend in total $ shipment in global aerospace market
Figure 7.31: Trend in total number of aircraft deliveries by Boeing and Airbus in commercial aerospace market
Figure 7.32: Order vs. delivery of aircraft by Boeing (2002-2012)
Figure 7.33: Order vs. delivery of aircraft by Airbus (2002-2012)
Figure 7.34: Composites distribution in the global construction industry in 2012
Figure 7.35: Composites shipment (M pounds) in the global construction industry in 2012
Figure 7.36: The construction industry by region in 2012
Figure 7.37: Composites shipments in the construction industry by region in 2012
Figure 7.38: US housing starts (1979-2012)
Figure 7.39: Trend in annual new home average prices in the US
Figure 7.40: Construction activity in EU (27) (2000-2012)
Figure 7.41: Corrosion market breakdown by type of applications
Figure 7.42: Percent comparison of petroleum tank shipments by construction material in North America
Figure 7.43: Percent comparison of septic tank shipments (in terms of number) by construction material in North America
Figure 7.44: Percentage distribution of sewage pipe market by type of material
Figure 7.45: Percentage distribution of oil and gas pipe market by type of material
Figure 7.46: Composites distribution in the global pipe and tank industry in 2012
Figure 7.47: Composites shipment (M pounds) in the global pipe and tank industry in 2012
Figure 7.48: The pipe and tank industry by region in 2012
Figure 7.49: Composites shipments in pipe and tank industry by region in 2012
Figure 7.50: Composites in the marine industry in 2012
Figure 7.51: Composites shipments in the marine industry in 2012
Figure 7.52: Composite materials distribution by region in the marine industry in 2012
Figure 7.53: Composites shipment by region in the marine industry in 2012
Figure 7.54: US recreational boating domestic boat unit shipment trends (1997-2010)
Figure 7.55: Trend in regional shipment of composites in marine industry
Figure 7.56: Composites distribution in consumer goods market in 2012
Figure 7.57: Composites shipment in consumer goods industry in 2012
Figure 7.58: Composites distribution by region in consumer goods industry
Figure 7.59: Composites shipment (M pounds) by region in consumer goods industry in 2012
Figure 7.60: Composites distribution in electrical/electronic industry
Figure 7.61: Global composites shipment in electrical/electronic industry in 2012
Figure 7.62: Composites distribution by region in electrical/electronic industry
Figure 7.63: Composites shipment by region in electrical/electronics industry in 2012
Figure 7.64: Composites distribution in wind energy
Figure 7.65: Composites shipment (M pounds) in wind energy
Figure 7.66: Composites distribution by region in wind energy industry
Figure 7.67: Trend in composites shipment in global wind energy (2007-2012)
Figure 7.68: Composites shipment in wind energy market in 2012
Figure 7.69: Increase in wind energy capacity installations
Figure 8.1: Classification of composite processing techniques
Figure 8.2: Global composites distribution (M pounds) by manufacturing processes in 2012
Figure 8.3: Global composites shipment (M pounds) by manufacturing processes in 2012
Figure 8.4: Global composites distribution ($M) by manufacturing processes in 2012
Figure 8.5: Global composites shipment ($M) by manufacturing processes in 2012
Figure 8.6: Hand lay-up and spray-up process distribution by applications in 2012
Figure 8.7: Hand lay-up and spray-up process shipment (million pounds) by applications in 2012
Figure 8.8: SMC/BMC molding distribution by applications in 2012
Figure 8.9: SMC/BMC molding shipment (million pounds) by applications in 2012
Figure 8.10: Pultrusion process distribution by applications in 2012
Figure 8.11: Pultrusion process shipment (M pounds) by applications in 2012
Figure 8.12: Market distribution of global composites industry by open and closed molding processes in 2012
Figure 8.13: Volume shipment in open and closed molding processes in 2012
Figure 8.14: Market distribution of thermoset composites industry by open and closed molding processes in 2012
Figure 8.15: Market distribution of global composites industry by open and closed molding processes in 2012
Figure 9.1: Global composites market growth trends (2007-2012)
Figure 9.2: Comparative regional growth rates in composites industry in 2010 and 2012
Figure 9.3: Increase in wind energy capacity installations
Figure 9.4: Personal watercraft (PWC) market trend (2001-2012)
Figure 9.5: Composites market growth trends by regions (2007-2012)
Figure 9.6: Global composites market by region in 2006
Figure 9.7: Global composites market (M pounds) by region in 2012
Figure 9.8: Global composites market ($M) by region in 2012
Figure 9.9: Comparative growth in composites shipment (M pounds) in various regions during last year
Figure 9.10: Growth rates in various market segments of the global composites industry in 2012
Figure 9.11: Average annual growth rates in various market segments of the global composites industry in last 5 years (2007-2012)
Figure 9.12: North American composites shipment (M pounds) by year
Figure 9.13: Growth rates in various market segments of North American composites industry in 2012
Figure 9.14: Average annual growth rates in various market segments of the North American composites industry in last 6 years (2007-2012)
Figure 9.15: US composites shipment trends by market segments (1970-2012)
Figure 9.16: Growth rate in various market segments in European composites market
Figure 9.17: Average annual growth rates in various market segments of the European composites industry in last 5 years (2007-2012)
Figure 9.18: Growth rate in various market segments in Asian composites market
Figure 9.19: Average annual growth rates in various market segments of the Asian composites industry in last 5 years (2007-2012)
Figure 9.20: Regional leadership in composites shipment in various market segments in 2011
Figure 9.21: Regional leadership in composites shipment in various market segments in 2012
Figure 9.22: External forces shaping the composites industry
Figure 9.23: Consumer spending by year for the US (1996-2012)
Figure 9.24: Quarterly consumer sentiment (US) for the period 2005-2012
Figure 9.25: Trend and forecast (1993-2014) in the US GDP
Figure 9.26: Comparative GDP growth in major regions
Figure 9.27: Global composites market forecast (2013-2018)
Figure 9.28: Global composites market forecast by region (2013-2018)
Figure 9.29: Global composites distribution (M pounds) by region in 2018
Figure 9.30: Global Composites distribution ($M) by region in 2018
Figure 9.31: Global composites shipment by region in 2018
Figure 9.32: Growth opportunities in various market segments (2013-2018)
Figure 9.33: Opportunities for composite products in various market segments
Figure 9.34: Growth forecast in global composites shipment by market segments in 2012
Figure 9.35: Average annual growth forecast in next 5 years (2013-2018) in global composites shipment by market segments
Figure 9.36: Global composites shipment (M pounds) by market segment in 2012
Figure 9.37: Global composites shipment (M pounds) by market segment in 2018
Figure 9.38: Global composites shipment ($M) by market segment in 2018
Figure 9.39: Growth forecast in North American composites shipment by market segments in 2012
Figure 9.40: Average annual growth forecast in next 5 years (2013-2018) in North American composites industry by market segments
Figure 9.41: North American composites shipment (M pounds) by market segments in 2012
Figure 9.42: North American composites shipment (M pounds) by market segments in 2018
Figure 9.43: North American composites shipment ($M) by market segments in 2018
Figure 9.44: Growth forecast in European composites shipment by market segments in 2012
Figure 9.45: Average annual growth forecast in next 5 years (2013-2018) in European composites shipment by market segments
Figure 9.46: European composites shipment (M pounds) by market segments in 2012
Figure 9.47: European composites shipment (M pounds) by market segments in 2018
Figure 9.48: European composites shipment ($ M) by market segments in 2018
Figure 9.49: Growth forecast in Asian composites shipment by market segments in 2012
Figure 9.50: Average annual growth forecast in next 5 years (2013-2018) in Asian composites shipment by market segments
Figure 9.51: Asian composites shipment (M pounds) by market segments in 2012
Figure 9.52: Asian composites shipment (M pounds) by market segments in 2018
Figure 9.53: Asian composites shipment (M pounds) by market segments in 2018
Figure 9.54: Open and closed molding distribution in 2012
Figure 9.55: Open and closed molding distribution in 2018
Figure 9.56: Global composites shipment by open and closed molding process in 2018
Figure 9.57: Global composites distribution (%) by manufacturing processes in 2018
Figure 9.58: Global composites shipment (m pounds) by manufacturing processes in 2018
Figure 9.59: Global composites distribution (%, $M) by manufacturing processes in 2018
Figure 9.60: Global composites shipment ($ M) by manufacturing processes in 2018
Figure 10.1: Global composites market by region in 2012
Figure 10.2: Global composites market shipment by region in 2012
Figure 10.3: Comparative global composites market shipment in 2012 vs. 2010
Figure 10.4: Regional breakdown of composites in various market segments in 2012
Figure 10.5: Composites market percentage distribution by leading countries
Figure 10.6: Composites shipment (M pounds) by top 10 leading countries of the world in 2012
Figure 10.7: Composites (pounds) per capita for top 10 leading countries of the world in 2012
Figure 10.8: Composites potential for top 10 leading countries of the world
Figure 10.9: Composites shipment distribution (%) in North American countries in 2012
Figure 10.10: Composites shipment (M pounds) in North American countries in 2012
Figure 10.11: Composites shipment distribution in Western European countries in 2012
Figure 10.12: Composites shipment in European countries in 2012
Figure 10.13: Composites (pounds) per capita in European countries in 2012
Figure 10.14: Composites shipment distribution in APAC countries in 2012
Figure 10.15: Composites shipment in APAC countries in 2012
Figure 10.16: Composites (pounds) per capita in APAC countries in 2012
Figure 10.17: Composites market distribution by applications in North America in 2012
Figure 10.18: Composites shipment (M pounds) in various applications in North America in 2012
Figure 10.19: Composites shipment ($M) in various applications in North America in 2012
Figure 10.20: Composites market distribution by applications in Europe in 2012
Figure 10.21: Composites shipment (million pounds) in various applications in Europe in 2012
Figure 10.22: Composites shipment ($M) in various applications in Europe in 2012
Figure 10.23: Composites market distribution by applications in Asia in 2012
Figure 10.24: Composites shipment (M pounds) in various applications in Asia in 2012
Figure 10.25: Composites shipment ($M) in various applications in Asia in 2012
Figure 11.1: Value chain for the composites industry
Figure 11.2: Global composites market breakdown (M pounds) by raw materials used in 2012
Figure 11.3: Raw materials ($M) shipment in global composites industry in 2012
Figure 11.4: Dollar ($) and gross profit flow chart through various nodes of the value chain (from raw material to the end product)
Figure 11.5: Gross profit ($ M) in raw materials (reinforcement and resins) market in 2012
Figure 11.6: Gross profit distribution (%) by type of raw materials (fiberglass, carbon, polyester, epoxy) market in 2012
Figure 11.7: Market distribution (%) by value ($) of the end product
Figure 11.8: Size ($B) of various market segments by value of composite products in 2012
Figure 11.9: Gross profit ($M) in various market segments
Figure 11.10: Gross profit distribution (%) by type of market segments
List of Tables
Table 7.1: Impact properties of some selected materials
Table 7.2: Application of composite materials in the automotive industry
Table 7.3: Segmented US light vehicle sales (in thousands of units)
Table 7.4: Applications of composite materials in aerospace structures
Table 7.5: Evolution of composite material applications at Airbus
Table 7.6: Aerospace structures made of composites
Table 7.7: Selected materials and processes for the Airbus A380
Table 7.8: Composite components in aircraft applications
Table 7.9: Structural fabric repair system
Table 7.10: Top 10 countries with top 3 wind energy manufacturers
Table 9.1: Market trends (2007-2012) in global composites shipment
Table 9.2: Average growth rates for 1, 10, 20, 30, and 40 years in the US composites industry
Table 9.3: Average annual growth rates in various regions of the global composites industry
Table 9.4: Market size and annual growth rates in various segments of global composites industry
Table 9.5: Market size and annual growth rates during last 5 years (2007-2012) in various market segments of global composites industry
Table 9.6: Market trends (2007-2012) in North American composites shipment
Table 9.7: Average annual growth rates during last 10, 20, 30, and 40 years (1970-2012) in various market segments of the US composites industry
Table 9.8: GDP and unemployment rate for leading countries
Table 9.9: Interest and exchange rates for leading countries
Table 9.10: Forecast for select markets
Table 9.11: Average annual growth forecasts in various regions of the global composites industry (2013-2018)
Table 9.12: Market size and annual growth forecasts during the next 6 years (2013-2018) in various market segments of the global composites industry
Table 10.1: Average annual growth rates in various regions of the global composites industry
Table 10.2: Ranking of top 10 countries of world in terms of composites shipment
Table 10.3: Ranking of 5 leading countries in Europe in terms of composites shipment
Table 10.4: Ranking of 5 leading countries in APAC in terms of composites shipment
Table 10.5: Ranking of 5 leading applications in North American composites industry
Table 10.6: Ranking of 6 leading market segments in the European composites industry
Table 10.7: Ranking of 5 leading applications in APAC region
Methodology
Lucintel has been in the business of market research and management consulting since 2000 and has published over 1000 market intelligence reports in various markets / applications and served over 1,000 clients worldwide. This study is a culmination of four months of full-time effort performed by Lucintel's analyst team. The analysts used the following sources for the creation and completion of this valuable report:
- In-depth interviews of the major players in this market
- Detailed secondary research from competitors’ financial statements and published data
- Extensive searches of published works, market, and database information pertaining to industry news, company press releases, and customer intentions
- A compilation of the experiences, judgments, and insights of Lucintel’s professionals, who have analyzed and tracked this market over the years.
Extensive research and interviews are conducted across the supply chain of this market to estimate market share, market size, trends, drivers, challenges, and forecasts. Below is a brief summary of the primary interviews that were conducted by job function for this report.
Thus, Lucintel compiles vast amounts of data from numerous sources, validates the integrity of that data, and performs a comprehensive analysis. Lucintel then organizes the data, its findings, and insights into a concise report designed to support the strategic decision-making process. The figure below is a graphical representation of Lucintel’s research process.
Buy Now
Choose a license that fits your team. Instant PDF delivery.
Prices exclude taxes. Instant delivery. Custom licensing available on request.
