Chemical Reports

Trends, opportunity and forecast in waterborne UV curable resin market in Canada to 2030 by chemistry (urethane acrylate and blend), and application (wood, graphics, opto & electronics, foil & inks, plastics, and others).

Trends, opportunity and forecast in UV-cured acrylic adhesive tape market in Canada to 2030 by process (foamed tapes, non-foamed tapes, and thermally conductive tapes), and application (automotive, electricals & electronics, aerospace, building & construction, and others).

Trends, opportunity and forecast in UV offset ink market in Canada to 2030 by type (polyethylene, polypropylene, polyvinyl chloride, and others), application (packaging, labels, commercial, and others), and end use industry (pharmaceutical, food & beverage, cosmetics, electronics, publishing, and others).

Trends, opportunity and forecast in NVH (system, parts, materials) market in Canada to 2030 by type (rubber shock absorber and sound insulation), and application (auto parts market and automobile market).

Trends, opportunity and forecast in dielectric material market in Canada to 2030 by technology (OLED Technology, TFT-LCD Technology, LCD Technology, LED-LCD Technology, PLASMA Technology, DLP Technology, and LCoS Technology) and material (calcium titanate, magnesium titanate, barium titanate, silicate, and others)

Trends, opportunity and forecast in amorphous soft magnetic materials market in Canada to 2030 by type (cobalt-based, Fe-Ni-based, and iron-based) and application (electronic article surveillance, flexible antenna, magnetic sensors, magnetic shieldings, and transformers)

Trends, opportunity and forecast in n-dimethylacetamide market in Canada to 2030 by type (pharmaceutical grade and industrial grade) and application (pharmaceutical industry, fiber industry, plastic industry, cosmetic industry, organic synthesis, and others)

Trends, opportunity and forecast in NBR o-ring seal market in Canada to 2030 by type (non reinforced seals and fabric reinforced seals) and end use (aerospace, general industrial, semiconductor, pharmaceutical, chemical, and others)

Trends, opportunity and forecast in monobutyltin trichloride market in Canada to 2030 by type (MBTC ≥ 99% and MBTC ＜ 99%), application (flat glass and container glass), and end use (construction, packaging, automotive, electronics, renewable energy, and others)

Trends, opportunity and forecast in monobutyltin oxide market in Canada to 2030 by type (sn below 55% and sn above 55%), application (PVC stabilizer, coating, unsaturated polyester resin, and other), and end use (plastics, textiles, electronics, construction, automotive, chemicals, and others)

Trends, opportunity and forecast in modacrylic fiber market in Canada to 2030 by type (medical grade and industrial grade) and application (protective apparel, hair fiber, upholstery, modacrylic pile, and others)

Trends, opportunity and forecast in silicon-based anode material market in Canada to 2030 by type (silicon oxide/carbon and silicon/carbon) and application (automotive, consumer electronics, power tools, and others)

Trends, opportunity and forecast in ultra-thin clear glass market in Canada to 2030 by manufacturing process (float, fusion, and down-draw), application (semiconductor substrate, touch panel display, fingerprint sensor, and others), and end use industry (consumer electronics, automotive & transportation, medical & healthcare, and others)

Trends, opportunity and forecast in no-clean flux solder paste market in Canada to 2030 by type (leaded solder paste and lead-free solder paste), application (SMT assembly and semiconductor packaging), and end use (automotive, aerospace, electronics, medical, and telecommunications).

Trends, opportunity and forecast in N-methylmorpholine N-oxide market in Canada to 2030 by type (NMMO solution and NMMO solid), and application (cellulose fibre solvent, medicines intermediates, and others).

Trends, opportunity and forecast in nitrided vanadium market in Canada to 2030 by type (vacuum production process and non-vacuum production process), grade (high purity and standard purity), and application (structural steel, tool steel, foundry industry, automotive, aerospace, chemical processing, and others).

Trends, opportunity and forecast in neodymium octoate market in Canada to 2030 by distribution channel (direct sales, distributors, and e-commerce), application (rubber, paints and coating, PVC, and others), and end use (automotive, aerospace, marine, construction, electronics, and textile).

Trends, opportunity and forecast in handheld chemical and metal detector market in Canada to 2030 by technology (raman spectroscopy, ION mobility spectrometry, metal identification, and others), application (chemical detection, explosive detection, narcotics detection, and metal detection), and end use (introduction, law enforcement agencies & forensic departments, customs & borders, military & defense, and airports).

Trends, opportunity and forecast in temperature indicator label market in canada to 2030 by type (color-based and barcode-based), label information (critical temperature indicator, critical time temperature indicators, and time temperature indicators), and end use (food and beverage, pharmaceuticals, medical devices, chemicals, and others).

Trends, opportunity and forecast in lubricant viscosity index improver market in Canada to 2030 by type (olefin copolymer VI improver (OCP) and polymethacrylate viscosity index improver (PMA)) and application (automotive lubricant and industrial lubricant)

Trends, opportunity and forecast in low friction coating market in Canada to 2030 by type (polytetrafluoroethylene (PTFE) and molybdenum disulfide (MoS2)) and end use (aerospace, automobile & transportation, general engineering, energy, and food & healthcare)

Trends, opportunity and forecast in micro-perforated film market in Canada to 2030 by type (polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET), and others), and material (fresh fruits & vegetables, bakery & confectionary, ready-to-eat food, and others).

Trends, opportunity and forecast in microcellular polyurethane foam market in Canada to 2030 by type (high-density foams and low-density foams), and application (automotive, building & construction, electronics, medical, aerospace, and others).

Trends, opportunity and forecast in mica tape for insulation market in Canadato 2030 by product (phlogopite, muscovite, and synthetic mica), application (thermal insulation and electrical insulation), and end use (industrial / traction motor & coils, transformer manufacturing, locomotive, wind power/renewable energy, and generator manufacturing).

Trends, opportunity and forecast in metallized polyester film market in Canada to 2030 by material (polyethylene terephthalate (PET), aluminum, silver, polypropylene, polyethylene (PE), nylon, and others), product type (lidding film, pouches & sachets, bags, wrapping films, blister packs, and others), and end use (cosmetics & personal care, food & beverages, pharmaceutical, consumer goods, and others)

Trends, opportunity and forecast in marine anti-fouling coating market in Canada to 2030 by type (controlled depletion polymer, self-polishing copolymer, foul release, and copper-based), and application (hull coatings , tank coatings , propellers, drive shafts, trim tabs, stabilizers, raw water intakes, seacocks, bow thrusters, and others)

Trends, opportunity and forecast in medical grade silicone market in Canada to 2030 by type (gels, elastomers, medical adhesives, medical coatings, liquid silicone rubbers, foam, and others), and application (prosthetics & implants, orthopedics components, cardiovascular devices, medical devices, medical tapes, drug delivery systems, and others)

Trends, opportunity and forecast in electrostatic discharge (ESD) films market in Canada to 2030 by end use industry (network and telecommunication industry, consumer electronics and computer peripheral, automotive industry, military and defense, healthcare, aerospace, and others)

Trends, opportunity and forecast in third-party chemical distribution market in Canada to 2030 by type (commodity chemicals and specialty chemicals), service type (chemical storage, chemical handling, chemical transportation, and others), and application (textiles, automotive, agriculture, pharmaceuticals, industrial, and others)

Trends, opportunity and forecast in specialty water treatment chemical market in Canada to 2030 by type (anti-foaming agents, biocides, coagulants, flocculants, corrosion inhibitors, disinfectants, and others), and end use industry (chemicals, energy & power, industrial, metallurgy, municipal, oil and gas, pulp & paper, and others)

Trends, opportunity and forecast in specialty chemical market in Canada to 2030 by product (food & feed additives, agrochemicals, flavor & fragrances, dyes & pigments, water treatment chemicals, personal care active ingredients, surfactants, construction chemicals)

Trends, opportunity and forecast in furfural market in Canada to 2030 by raw material (corn cobs, sugarcane bagasse, sunflower hull, rice husk, and others), application (furfuryl alcohol, solvent, intermediate, and others), and end use industry (agriculture, paints & coatings, pharmaceuticals, food & beverage, refineries, and others)

Trends, opportunity and forecast in fluorocarbon resin market in Canada to 2030 by type (solvent-based, high solid, and others) and application (semiconductors, automobiles, industrial machines, chemical industry, engineering works and construction, household appliances, and others)

Trends, opportunity and forecast in wet laid nonwoven market in Canada to 2030 by type (natural fibers and synthetic fibers) and application (building materials, automotive interior, public utility, home textiles, hygiene products, and others)

Trends, opportunity and forecast in refrigerants market in Canada to 2030 by type (HFC, HFO, isobutane, propane, ammonia, carbon dioxide, and others), and application (refrigeration system, chillers, air conditioning systems, and MAC)

Trends, opportunity and forecast in titanium 3D printing material market in Canada to 2030 by application (tooling, prototyping, and functional parts), end use industry (aerospace and defense, healthcare, automotive, and others)

Trends, opportunity and forecast in biocompatible 3D printing material market in Canada to 2030 by type (polymer, metal, and others), form (powder, liquid, and others), and application (implants & prosthesis, prototyping & surgical guides, tissue engineering, hearing aids, and others)

Trends, opportunities, and forecast for the hollow fiber membrane market in Canada from 2017 to 2028 by filtration type (microfiltration, ultrafiltration, and reverse osmosis), membrane material (polymer and ceramic), end use industry (water & wastewater treatment, food & beverages, biotechnology, pharmaceuticals & chemicals, and others)

Trends, opportunities, and forecast for the aroma chemical market in Canada from 2017 to 2028 by source (natural, synthetic, and natural-identical), chemical (benzenoids, musk chemicals, terpenes & terpenoids, and others), application (flavors and fragrance)

Trends, opportunities, and forecast for the SGP interlayer film market in Canada from 2017 to 2028 by type (0.89mm thickness, 1.52mm thickness, and 2.28mm thickness), application (automotive, building & construction, photovoltaic, and others)

Trends, opportunities, and forecast for the polyphenylene sulfide market in Canada from 2017 to 2028 by product type (linear PPS, cured PPS, and branched PPS), application (automotive, electrical & electronics, industrial, coatings, and others)

Trends, opportunities, and forecast for the cyclic olefin copolymer market in Canada from 2017 to 2028 by grade (films and resins), end use industry (packaging, healthcare, electronics, optics, and others)

Trends, opportunities, and forecast for the calcium hydride market in Canada from 2017 to 2028 by purity (≤ 99% and above 99%), application (hydrogen generation, reducing agent for metal oxides, drying agent, and others)

Trends, opportunities, and forecast for the ampoule market in Canada from 2017 to 2028 by material type (glass and plastic), capacity (less than 2 ml, 3 to 5 ml, 6 to 8 ml, and above 8 ml), ampoule type (straight stem, open funnel, closed funnel, and others), end use industry (pharmaceutical, chemical, veterinary, spa products, dental, and cosmetics and beauty aids)

Trends, opportunities, and forecast for the stretch sleeve & shrink sleeve label market in Canada from 2017 to 2028 by product type (shrink sleeve and stretch sleeve), material (PVC, PET, PE, OPP & OPS, and others), end use industry (food, soft drinks, alcoholic drinks, cosmetics & household, pharmaceutical, and others)

Trends, opportunities, and forecast for the point of purchase packaging market in Canada from 2017 to 2028 by material (glass, paper, plastic, metal, and others), product (pallet display, endcap display, floor display, counter display, side kick display, and others), application (food and beverage, personal care and cosmetics, pharmaceutical, electronics, automotive, and others), end use industry (supermarkets & hypermarkets, convenience stores, specialty stores, and others)

Trends, opportunities, and forecast for the animal feed additive market in Canada from 2017 to 2028 by product (vitamins, amino acids, antibiotics, enzymes, minerals, eubiotics, and others), form (liquid and dry), species (poultry, swine, aquatic animals, cattle, and others)

Trends, opportunities, and forecast for the recycled plastic market in Canada from 2017 to 2028 by product (polyethylene, polyethylene terephthalate, polypropylene, polyvinyl chloride, polystyrene, and others), source (plastic bottles, plastic films, polymer foam, and others), application (building & construction, packaging, electrical & electronics, textiles, automotive, and others)

Trends, opportunities and forecast in Tobacco Packaging Market in Canada to 2028 by type (primary, secondary, and bulk), material type (paper boxes, paper, plastic, jute, and others), and end use industry (smoking tobacco, smokeless tobacco, and raw tobacco)

Trends, opportunities and forecast in Protective Packaging Market in Canada to 2028 by product type (flexible, rigid, and foam), material type (paperboard, plastics, foam plastics, and others), functions (cushioning, blocking & bracing, void-fill, insulation, and wrapping), and application (food & beverages, healthcare, industrial, automotive, consumer electronics, and others)