• helpdesk@Lucintel.com
  • |
  • +1 972 636 5056
  • |
  • Login
  • |
  • Register
  • |
...

Request the impact of COVID-19 in this market at no additional cost. Buy it today to get an advantage.

Request Now


Composites industry in Brazil is the largest in Latin America and presently is witnessing good growth after some years of slowdown thanks to the recovery of the automotive industry and increased urbanization. Brazil traditionally has a strong manufacturing base and higher per capita income. As a production hub in the entire Latin America, one can find the presence of all the global players in the Brazilian composites industry - Reichhold, Ashland, Owens Corning, Huntsman, Azko Nobel, 3M in the material side along with the Brazilian biggies like Elekeiroz, Embrapol, Cromitec, Fiacbras. It is interesting to note the market dynamics created by the OEMs and their supply chain to achieve greater efficiency and longer life-cycle value. The newer applications of the composites material in Brazil and penetration in new areas are crucial to the future growth of the industry. Brazil composites industry is not a new one, the bigger question is where is it headed for under a vibrant and increasingly globalized Brazilian economy.


Brazil composites market is estimated to reach USD $4 billion in 2013. The composite industry in Brazil is characterized by large number of small-sized players in molding and fabrication and a moderate number of materials suppliers that are mostly global players. Though Brazil has a good manufacturing base and location advantage, very little is being exported in neighboring countries either as raw materials or finished composites products. It is mostly due to low per-capita composites consumption in these countries. Construction and automotive being the major composites user, the industry is crucially dependent on the overall economic growth in Brazil. Robust economic growth, low level of inflation, strong export performance, falling interest rates have facilitated steady growth of the composites industry. The growth rate was particularly high in 2007 due to record number of vehicles production. However, the global economic crisis has affected Brazilian economy too and is expected to moderate the growth rate in key composites application sector. Long term growth prospects remain bright for the industry in Brazil given increased expenditure in infrastructure development, emerging application areas and greater composite consumption.

This report takes a long-look at the composites industry in Brazil, the key sectors and their growth complete with the drivers and challenges, the market trend and dynamics in the industry and also its material supply chain and the future outlook. This unique report from Lucintel will provide you with all the valuable information and tools you may need to operate your business successfully in Brazil or to learn potentials of Brazilian composites market. This report will save you hundreds of hours of your own personal research time and will significantly benefit you in expanding your business in the Brazilian composites market. In today's stringent economy, you need every advantage that you can find to keep ahead in your business.

To make business, investment, or strategic decisions, you need timely and adequate information. Brazil composites market report fulfills this core need. This is an indispensable reference guide for fiber suppliers, resin suppliers, molders, OEMs, investors, researchers, executives, distributors and many more, who are dealing with the carbon fiber market. Some of the features of this market report are:
 
  • Brazil composites market size in terms lbs shipment.
  • Market leaders for various applications such as civil construction, automotive, pipes, tanks, wind blade, electrical, marine, and other.
  • Trends and forecasts (2008-2013) for the composites market in Brazil.
  • Brazil composites market size for fiberglass
  • Brazil composites market size for thermoset resins.
  • Brazil composites market leaders and their market shares in fiberglass and resin category.
  • Leading molders and their market shares in various applications.
  • List of molders with contact addresses.
  • A bout 50 figures/charts and 1 table in this 117-page market report to help you make confident business decisions.
 
  1. Executive Summary  

 2. Brazil Composites Market Analysis  
 2.1. Overview of Composites Market in Brazil  
 2.2. Market presence  
 2.3. Regional spread of composites industry in Brazil  
 2.4. Market scenario  
 2.5. Market segmentation  
 2.6. Construction market  
 2.6.2. Major composite molders in construction industry in Brazil  
 2.7. Transportation market  
 2.7.1. Composites application in automobile sector in Brazil  
 2.7.2. Market dynamics in auto composites market of Brazil  
 2.7.3. Automotive industry in Brazil  
 2.7.4. Major composites fabricators in Brazilian Auto market  
 2.7.5. Global economic downturn and effect on Brazil's automobile industry  
 2.8. Pipe & Tank market  
 2.8.1. Advantage of composites over iron pipes  
 2.8.2. Growth drivers in the pipe market  
 2.8.3. Market leaders  
 2.8.4. Recent developments in Brazilian pipe market  
 2.8.5. Market dynamics  
 2.8.6. Water tanks  
 2.9. Wind Energy market  
 2.9.1. Power generation scenario in Brazil  
 2.9.2. Wind energy program in Brazil  
 2.9.3. Major Wind Power systems manufacturers in Brazil  
 2.9.4. Challenges in wind energy market  
 2.9.5. Opportunities in wind energy market in Brazil  
 2.10. Electrical, Electronics and Telecom market  
 2.10.1. Electrical  
 2.10.2. Electronics  
 2.10.3. Telecom  
 2.11. Marine market  
 2.11.1. Fiberglass boat industry in Brazil  
 2.11.2. Advantages of boat building in Brazil  
 2.11.3. Major fiberglass boat producers in Brazil  
 2.11.4. Market drivers in Brazilian boat industry  
 2.11.5. Market dynamics in the Brazilian boat industry  
 2.12. Aerospace market  
 2.12.1. Major aircraft manufacturing companies in Brazil  

 3. Brazil Composites Market by Manufacturing Processes  
 3.1. Overview of composites manufacturing processes  
 3.1.1. Hand Lay-Up  
 3.1.2. Spray up  
 3.1.3. Compression Molding  
 3.1.4. RTM  
 3.1.5. Pultrusion  
 3.1.6. Filament Winding  
 3.1.7. VARTM  
 3.2. Manufacturing processes used in Brazilian composites industry  
 3.4. Recycling  
 3.5. Technology improvement and diffusion  
 3.6. Composite machinery suppliers  

 4. Market Trends and Forecasts  
 4.1. Growth and emerging trends in composites market in Brazil  
 4.2. Growth Drivers and Industry Challenges  
 4.2.1. Major growth drivers in individual sectors and its likely impact on the industry  
 4.2.2. Major challenges facing the Brazilian composites industry  
 4.4. Growth Opportunities  

 5. Fiberglass Market Analysis  
 5.1. Market size of fiberglass in Brazil  
 5.2. Demand and supply of fiberglass  
 5.3. Trends in fiberglass production in Brazil  
 5.4. Market leaders and their market shares  
 5.5. Present issues and challenges in Brazil fiberglass industry  
 5.6. Forecast for fiberglass market  

 6. Resin Market Analysis  
 6.1. Types of resin materials used in Brazil composites market  
 6.1.1. Polyester  
 6.1.2. Vinyl ester  
 6.1.3. Epoxy  
 6.1.4. Acrylic & others  
 6.2. Trends in resin production in Brazil  
 6.3. Market leaders and their market shares  
 6.4. Market dynamics  
 6.5. Resin market forecast  
 6.6. List of resin suppliers in Brazil  

 7. Brazil's Economy  
 7.1. Brazil's economy at a glance  
 7.2. Economic parameters  
 7.3. Evolution of Brazilian economy  
 7.4. Brazil's external trade  
 7.5. Salient features of Brazilian economy  
 7.6. Global economic downturn and its likely effects on composites industry in Brazil  

List of Figures  
 List of Tables  
 Abbreviations and Technical Units  
 Disclaimer  
 Copyright  
 About Us  

List of Figures
 
Chapter 1
 
Fig. 1.1: Brazilian composites market by application, 2007
Fig. 1.2: Amount of composites shipment in various applications in Brazil in million lb.
Fig. 1.3: Brazilian composites market breakdown by type of manufacturing processes
Fig. 1.4: Market trend (2002-2007) in Brazilian composites market.
Fig. 1.5: Market forecasts (2008-2013) for the Brazilian composites industry
Fig. 1.6: Fiberglass consumption in Brazil vs. rest of the world
Fig. 1.7: Trend in resin production in Brazil
Chapter 2
 
Fig. 2.1: Composite consumption in Brazil
Fig. 2.2: Regional spread of composite industry in Brazil
Chapter 3
 
Fig. 3.1: Composites market breakdown by type of applications such as pipes, tanks, automotive, wind, construction, marine and other applications
Fig. 3.2: Amount of composites shipment in various applications in Brazil in million lb.
Fig. 3.3: Percentage of composites in construction market
Fig. 3.4: Amount of composites used in the construction market
Fig. 3.5: Percentage of composites in transportation market
Fig. 3.6: Amount of composites used in transportation sector in Brazil
Fig. 3.7: Trend in vehicle production in Brazil
Fig. 3.8: Growth in vehicle production in Brazil different categories
Fig. 3.9: Percentage of composites in pipe & tank market
Fig. 3.10: Amount of composites used in pipe & tank market in Brazil
Fig. 3.11: Percentage of composites in wind energy market
Fig. 3.12: Amount of composites used in wind energy application
Fig. 3.13: Wind energy generation in Brazil
Fig. 3.14: Percentage of composites in electrical & electronics market
Fig. 3.15: Amount of composites used in electrical & electronics application
Fig. 3.16: Percentage of composites in marine market
Fig. 3.17: Amount of composite used in marine market in Brazil
Fig. 3.18: Trend in fiberglass boat production in Brazil 2002-2007
Chapter 4
 
Fig. 4.1: Brazilian composites market breakdown by type of manufacturing processes
Fig. 4.2: Composites market size by manufacturing process in Brazil
Chapter 5
 
Fig. 5.1: Market trend 2002-2007 in Brazilian composites market
Fig. 5.2: Composite production trendline
Fig. 5.3: Forecast for Brazilian composites market 2008-2013
Fig. 5.4: Composite consumption in various applications in Brazil in 2013
Fig. 5.5: Forecast for thermoset resin demand in Brazil
Fig. 5.6: Forecast for fiberglass demand in Brazil 2008-2013
Chapter 7
 
Fig. 7.1 Fiberglass consumption – Brazil and rest of the world
Fig. 7.2: Trend in fiberglass production in Brazil 2002-2007
Fig. 7.3: Market share of fiberglass by supply source in Brazil
Chapter 8
 
Fig. 8.1 Schematic representation of uncured polyester resin.
Fig. 8.2: Schematic representation of cured polyester resin
Fig. 8.3: Schematic representation of uncured vinyl ester resin.
Fig. 8.4 Schematic representation of cured vinyl ester resin.
Fig. 8.5: Trend in thermoset resin production in Brazil
Chapter 13
 
Fig. 13.1: Trend in real GDP growth rate in Brazil
Fig. 13.2: Brazil’s leading export destinations
List of Tables
 
Table 1.1 Brazil composite market parameters and attributes in 2007. 
 
.

Buy full report or by chapter as follows

Price by License Type:
[-] Hide Chapter Details
[Chapter Number] [Chapter Name] [Chapter Number Of Pages] [Chapter Price]
Title/Chapter Name Pages Price
Full Report: Composites in Brazil: Trends, Forecast and Competitive Analysis Full Report $ 4,850
Total 117 pages, 50 figures/charts and 1 table.
 
Lucintel has been in the business of market research and management consulting since 2000 and has published over 600 market intelligence reports in various markets / applications and served 1,000+ clients worldwide. This study is a culmination of four months of full-time effort performed by Lucintel's analyst team. The analysts used the following sources for the creation and completion of this valuable report:
  • In-depth interviews of the major players in this market
  • Detailed secondary research from competitors’ financial statements and published data
  • Extensive search of published works, market and database information with industry news, company press releases, and customer intentions
  • A compilation of the experiences, judgments, and insights of Lucintel’s professionals, who have analyzed and tracked this market over the years.
Extensive research and interviews are conducted in the supply chain of this market to estimate market share, market size, trends, drivers, challenges and forecasts in the market. Below is a brief summary of primary interviews conducted by both job function and region.


Thus, Lucintel compiles vast amounts of data from numerous sources, validates the integrity of that data, and performs a comprehensive analysis on it. Lucintel then organizes the data, its findings, and insights into a concise report designed to support the strategic decision-making process. The figure below is a graphical representation of the Lucintel research process.

 

Please sign in below to get report brochure - Composites in Brazil.

At Lucintel, we respect your privacy and maintain the confidentiality of information / data provided by you
(Please enter your corporate email. * These fields are mandatory )